How to Raise a SR to Oracle for failed TSM drive ?
Suppose we have to raise a call with oracle, replacing a failed drive, then we need to follow the steps below. I. Identify Error with Drive The drive can...
Suppose we have to raise a call with oracle, replacing a failed drive, then we need to follow the steps below. I. Identify Error with Drive The drive can...
Suppose our system is down and is not booting up correctly. We need to boot it from an ISO image/CD-DVD drive to repair the system back. Lets have a look...
Today we will see how to Replace a disk in the ZFS Root Pool. Lets have a look at them commands step by step. 1. Take the disk in...
Today in this article, we will see how to check the status of all disks on a HP Proliant server. We will check it out both on server CLI and...
Today lets have a look how to create a logical drive in hpssacli i.e. HP Smart storage array configuraiton interface. To understand this, lets see the available unassigned disks and...
In this post we will look at an interesting feature of linux to write zeros or random characters to any device in Linux. One old way is to use dd...
We have seen how to create array in HPSSACLi earlier. Today we will look how to delete an array or logical drive in HP Smart Storage Admin CLI. Lets have...
Most of the times we encounter an error when the server logical drive is failed and the system hangs. You can’t boot the system until and unless you re-enable the...
Today lets have a look at a short tip to quickly fill complete disk space of our hard drive in Linux with a single command. It is an interesting and...