How to see status of all disk arrays on HP Proliant Servers ?

Today in this article, we will see how to check the status of all disks on a HP Proliant server.

We will check it out both on server CLI and on its ILO.

1. Check the drive status on server using hpacucli utility.

root@ngelinux# hpacucli

=> ctrl all show config
Smart Array P410i in Slot 0 (Embedded)    (sn: 5001438018A1AC999)
Smart Array P812 in Slot 1                (sn: PAGXQ0BRH3O1999)
   array A (SAS, Unused Space: 0  MB)
      logicaldrive 1 (136.7 GB, RAID 1, OK)
      physicaldrive 5I:1:5 (port 5I:box 1:bay 5, SAS, 146 GB, OK)
      physicaldrive 6I:1:1 (port 6I:box 1:bay 1, SAS, 146 GB, OK)
      physicaldrive 5I:1:6 (port 5I:box 1:bay 6, SAS, 146 GB, OK, spare)

   array B (SAS, Unused Space: 0  MB)
      logicaldrive 2 (410.1 GB, RAID 5, OK)
      physicaldrive 5I:1:7 (port 5I:box 1:bay 7, SAS, 146 GB, OK)
      physicaldrive 5I:1:8 (port 5I:box 1:bay 8, SAS, 146 GB, OK)
      physicaldrive 6I:1:2 (port 6I:box 1:bay 2, SAS, 146 GB, OK)
      physicaldrive 6I:1:3 (port 6I:box 1:bay 3, SAS, 146 GB, OK)
      physicaldrive 6I:1:4 (port 6I:box 1:bay 4, SAS, 146 GB, OK, spare)

   Enclosure SEP (Vendor ID HP, Model P812 INT EXP) 248 (WWID: 50014380240A0721, Box: 1)
   Expander 250 (WWID: 50014380240A0726, Box: 1)
   SEP (Vendor ID PMCSIERA, Model  SRC 8x6G) 249 (WWID: 50014380240A073AS)
=>


=> ctrl all show status
Smart Array P410i in Slot 0 (Embedded)
   Controller Status: OK
Smart Array P812 in Slot 1
   Controller Status: OK
   Cache Status: OK
   Battery/Capacitor Status: OK
=>

 

2. Take ILO console of the server and check Summary.

ngelinux ilo summary
ngelinux ilo summary

 

3. Now check drive status inside drives tab.


ngelinux_ilo_drives
ngelinux_ilo_drives

Leave a Reply

Your email address will not be published.